This article is more than 1 year old
Warming up the thruster that will ram LOHAN to glorious heights
Project team prepares to shove pocket rocket in toaster
Our audacious Low Orbit Helium Assisted Navigator (LOHAN) spaceplane project continues to advance on multiple fronts, and while Neil Barnes and Anthony Stirk put together the Special Project Electronic Altitude Release System (SPEARS) control board, we've been doing some more work on the Vulture 2 rocket motor heater set-up.
To summarise, we know a solid rocket motor will fire at altitude, but the effect of very low temperature on the thruster's ammonium perchlorate composite propellant (APCP) is unknown.
To launch a pre-emptive strike on this potential problem, we decided to heat the motor on the ascent phase of the mission, and got our hands on a space-grade Polyimide Thermofoil flexible heater.
The heater's effective area is 300.257 cm2, and its resistance is 64Ω. At 12V it draws 0.1875A and pumps out 2.24W, which translates to a watt density of 0.0078W/cm2. We hooked it up to a 1300mAh Lithium Polymer (LiPo) battery (11.1V nominal)...
...and the first results were encouraging. Here's how the LOHAN toaster performed when sandwiched between two sheets of styrofoam: