Get in the zone, SK Hynix tells data as it drops veil on ZNS SSD

NVMe standard for parking different data types in different zones for faster access


Korean chipmaker SK Hynix today announced its Zoned Name Spaces (ZNS) SSD, which stores different data types in different parts of the drive, and said it would start shipping products in the first half of 2020.

The vendor – which said its development work on the SSD would be complete by the end of the year – also quantified how much the emergent architecture (which is becoming an NVMe standard expected to be seen all over world+dog's data centres) would speed access and extend its drive's working life.

The target market for the SSD is – as you'd imagine – data centre servers involved with AI and big data.

The firm said it had demoed its ZNS SSD with open hardware folk at the Open Compute Project (OCP) Global Summit – which took place in San Jose earlier this month – showing the device storing data with similar usage and frequency access patterns in different zones of the drive. Three data types were identified in an SK Hynix blog as music, video and images. A standard SSD stores any kind of data anywhere in the drive.

It was talking about a potential increase in access speed of "up to 30 per cent" and an extension of the SSD's work-life – when compared to a "traditional SSD" – of "over four times". How the Korean vendor came about those numbers was not explained.

Hynix's ZNS SSD features 2TB of 72-layer TLC (3 bits/cell) 3D NAND using 512Gb dies. It comes in an M.2 gumstick card 22110 format with an NVMe 1.2.1 interface running across a PCIe gen 3 link.

Microsoft's Lee Prewitt, a principal hardware program manager, presented on ZNS at the Open Compute Project event, pairing it with disk drive SMR (shingled magnetic recording), and said both SMR and ZNS were good methods of managing large-capacity drives.

Youtube Video

Lee Prewitt presents at OCP. The ZNS part starts at 8min 50sec

The ZNS technical proposal is currently being mulled over by the NVMe workgroup, which is developing an industry standard for these types of interfaces. The idea is that the host system application software writes data sequentially into an open zone on the SSD. It can be read randomly from any zone and zones are deleted as a whole.

This makes any write amplification due to the garbage collection process (rescuing valid data from a set of blocks about to be deleted and rewriting it elsewhere in the drive) close to zero. That helps to extend the drive's endurance.

El Reg expects other drive manufacturers to be on roughly the same schedule and looking to ship their ZNS efforts next year. ®


Other stories you might like

  • Share your experience: How does your organization introduce new systems?

    The answer is rarely obvious. Take part in our short poll and we'll find out together

    Reg Reader Survey The introduction of new systems into an organization is essential. If we stay still, if we continue to rely on legacy systems, if we fail to innovate – well, we (or, in reality, the company) will die. As business guru Sir John Harvey-Jones once put it: “If you are doing things the same way as two years ago, you are almost certainly doing them wrong.”

    But who should lead innovation in our companies? Who should be introducing new systems? The answer is not obvious.

    On one hand, the introduction of new systems into the business should be led by the business. In principle, the people doing the work, dealing with the suppliers, selling to the customers, are best placed to be standing up and saying: “We need the system to do X,” whether their motivation be to reduce cost, increase revenues, make products more efficiently, or even bolster our environmental credentials.

    Continue reading
  • These Rapoo webcams won't blow your mind, but they also won't break the bank

    And they're almost certainly better than a laptop jowel-cam

    Review It has been a long 20 months since Lockdown 1.0, and despite the best efforts of Google and Zoom et al to filter out the worst effects of built-in laptop webcams, a replacement might be in order for the long haul ahead.

    With this in mind, El Reg's intrepid reviews desk looked at a pair of inexpensive Rapoo webcams in search for an alternative to the horror of our Dell XPS nose-cam.

    Rapoo sent us its higher-end XW2K, a 2K 30fps device and, at the other end of the scale, the 720p XW170. Neither will break the bank, coming in at around £40 and £25 respectively from online retailers, but do include some handy features, such as autofocus and a noise cancelling microphone.

    Continue reading
  • It's one thing to have the world in your hands – what are you going to do with it?

    Google won the patent battle against ART+COM, but we were left with little more than a toy

    Column I used to think technology could change the world. Google's vision is different: it just wants you to sort of play with the world. That's fun, but it's not as powerful as it could be.

    Despite the fact that it often gives me a stomach-churning sense of motion sickness, I've been spending quite a bit of time lately fully immersed in Google Earth VR. Pop down inside a major city centre – Sydney, San Francisco or London – and the intense data-gathering work performed by Google's global fleet of scanning vehicles shows up in eye-popping detail.

    Buildings are rendered photorealistically, using the mathematics of photogrammetry to extrude three-dimensional solids from multiple two-dimensional images. Trees resolve across successive passes from childlike lollipops into complex textured forms. Yet what should feel absolutely real seems exactly the opposite – leaving me cold, as though I've stumbled onto a global-scale miniature train set, built by someone with too much time on their hands. What good is it, really?

    Continue reading
  • Why Cloud First should not have to mean Cloud Everywhere

    HPE urges 'consciously hybrid' strategy for UK public sector

    Sponsored In 2013, the UK government heralded Cloud First, a ground-breaking strategy to drive cloud adoption across the public sector. Eight years on, and much of UK public sector IT still runs on-premises - and all too often - on obsolete technologies.

    Today the government‘s message boils down to “cloud first, if you can” - perhaps in recognition that modernising complex legacy systems is hard. But in the private sector today, enterprises are typically mixing and matching cloud and on-premises infrastructure, according to the best business fit for their needs.

    The UK government should also adopt a “consciously hybrid” approach, according to HPE, The global technology company is calling for the entire IT industry to step up so that the public sector can modernise where needed and keep up with innovation: “We’re calling for a collective IT industry response to the problem,” says Russell MacDonald, HPE strategic advisor to the public sector.

    Continue reading
  • A Raspberry Pi HAT for the Lego Technic fan

    Sneaking in programming under the guise of plastic bricks

    There is good news for the intersection of Lego and Raspberry Pi fans today, as a new HAT (the delightfully named Hardware Attached on Top) will be unveiled for the diminutive computer to control Technic motors and sensors.

    Continue reading
  • Reg scribe spends week being watched by government Bluetooth wristband, emerges to more surveillance

    Home quarantine week was the price for an overseas trip, ongoing observation is the price of COVID-19

    Feature My family and I recently returned to Singapore after an overseas trip that, for the first time in over a year, did not require the ordeal of two weeks of quarantine in a hotel room.

    Instead, returning travelers are required to stay at home, wear a government-issued tracking device, and stay within range of a government-issued Bluetooth beacon at all times for a week … or else. No visitors are allowed and only a medical emergency is a ticket out. But that sounded easy compared to the hotel quarantine we endured in 2020.

    Continue reading
  • Intel teases 'software-defined silicon' with Linux kernel contribution – and won't say why

    It might enable activation of entirely new features on existing Xeon CPUs … or, you know, not

    Intel has teased a new tech it calls "Software Defined Silicon" (SDSi) but is saying almost nothing about it – and has told The Register it could amount to nothing.

    SDSi popped up around three weeks ago in a post to the Linux Kernel mailing list, in which an Intel Linux software engineer named David Box described it as "a post-manufacturing mechanism for activating additional silicon features".

    "Features are enabled through a license activation process," he wrote. "The SDSi driver provides a per-socket, ioctl interface for applications to perform three main provisioning functions." Those provisioning functions are:

    Continue reading
  • Chip manufacturers are going back to the future for automotive silicon

    Where we're going, we don't need 5nm

    Analysis Cars are gaining momentum as computers on wheels, though chip manufacturers' auto focus isn't on making components using the latest and greatest fabrication nodes.

    Instead, companies that include Taiwan Semiconductor Manufacturing Co and Globalfoundries are turning back the clock and investing billions in factories that use older manufacturing techniques to make chips for vehicles.

    The rapid digitization and electrification of cars has created a giant demand for smaller, more power-efficient auto chips, said Jim McGregor, principal analyst at Tirias Research. He added that cars don't necessarily need the latest manufacturing processes, though, and many are still using analog-based components for various functions.

    Continue reading

Biting the hand that feeds IT © 1998–2021